Water Tank Panel
- Water Tank Panel
- Watertightness, Drain Capability and Strength of Water Tank
- Reinforcement Structure
- Partition Type Water Tank
1. GRP Panel Model
| Wall Panel |  |
Drain Panel |  | ||
|---|---|---|---|---|---|
| Bottom Panel |  |
Roof Panel |  |
Manhole Panel |  |
2. GRP Panel Formation
| Wall Panel |  |
Drain Panel |  | ||
|---|---|---|---|---|---|
| Bottom Panel |  |
Roof Panel |  |
Manhole Panel |  |
3. GRP Panel Composition by Height
 |
4. Panel Physical Properties (KS F 4811 Standard)
| Item | Unit | Standard | Result | Test Method | Remark |
|---|---|---|---|---|---|
| Tensile Strength | MPa | Over 60 | 91.4 | KS F 4811:2016 | |
| Bending Strength | MPa | Over 80 | 200 | KS F 4811:2016 | |
| ElasticmodulesinBending | MPa | Over 6000 | 15287 | KS F 4811:2016 | |
| Glass Fiber Content | % | Over 25 | 31 | KS F 4811:2016 | |
| Barcol Hardness | - | Over 30 | 61 | KS F 4811:2016 | |
| Moisture Absorption | % | Below 1.0 | 0.05 | KS F 4811:2016 | |
| Hydrostatic Pressure | - | Over4 times | 4 times | KS F 4811:2016 |
5. Stress analysis of GRP Panel
- - GRP Water tank panel is designed with special shape for maximizing safety against stress and deformation, so it has better structural strength than normal circle designed panel.
- - As GRP Water panel is manufactured by oil-hydraulic press under high temperature and high pressure, it maintain stop water pressure strength and there is nodimensional deviation by temperature change.
